Prismasync software for OCE CS665

[surgeon]

Please need help.
We have OCE CS665 / Bizhub 6501
and Océ PRISMAsync print controller
some times ago hard disk is broken.
We replace HDD and can't find install cd's for Prismasync.
Maybe we lost this cd's when we movе.
We have all serials and license key.
We not first hand of this print machine.
Official OCE have more questions and zero help.

Somebody help with files from cd Prismasync for CS665, CS6x5

[methogod]

should be the same thing as the internal ic408....

if i think its just a built in controller.....


let me know if you need the konica version - if you 100% down, i can try to help you get back up by installing the software.

may look like a Konica to the fiery, but should work just fine.


post some images or hit me on skype (methogod)

[surgeon]

should be the same thing as the internal ic408....

if i think its just a built in controller.....


let me know if you need the konica version - if you 100% down, i can try to help you get back up by installing the software.

may look like a Konica to the fiery, but should work just fine.


post some images or hit me on skype (methogod)

Hi.
Thanks for quick reply.
We don't have ic-408.
I send pictures of print controller.

I don't know were find software for this PC.
I try to install creo software from version 1.0 and he don't work.

Around me don't have similar digital machines.
I not have another ways for take software for prismasync.


20130916_144239.jpg20130916_144139.jpg20130916_144155.jpg20130916_144200.jpg

[jotunn]

Nice - ordinary PC, but definitely not a Konica Minolta/EFI Fiery clone - looks like OCE's own solution. The only thing from EFI could be an interface card - but I'm almost 100% sure that none of KM/EFI software could run on this controller.

It would be nice if you could post some good photos of interface card (both sides).

[surgeon]

Today at evening taken photos of interface card )))20130916_235658.jpg20130916_235650.jpg
Photos not so good.
Tomorrow take good photos.

[Setright]

It is 100% proprietary, you cannot install anything other than Océ software on this controller.

I know these machines very well, but I cannot supply you with the software. Why does your local Océ/Canon office not want to help you?

[surgeon]

Very lazy to search the.
They want to sell new equipment.

[malamat]

I also faced the same problem. can anyone help for oce 665 prismasync controller system cd.i have only two floppy disk.

[methogod]

buy a USB floppy drive on ebay or amazon, see if disks read.

[malamat]

buy a USB floppy drive on ebay or amazon, see if disks read.

hi. i have floppy drive and floppy disk but no info on how to install.