Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 1 of 1
  1. #1
    Technician
    Join Date
    Mar 2013
    Posts
    31
    Rep Power
    23

    Creo ColorServer (Icon PowerPro Plus)

    Anyone know how to 'disable' or 'turn off' Color Management on a Rip using a Creo ColorServer?

    I want make some custom ICC Profiles and before sending the targets, you have to disable ALL Color Management. So that the data is printed 'AS IS' without ANY adjustments.


    ICON CPP650 w/ ICON PowerPro Plus v2.0 15-May-2008


    Cheers,

    Topstep1

    please look at page 2 of this PDF attachment. If there an Engine Mode on KMs that will allow for a Calibration mode? (not the regular call in the interface)

    "The engine was set-up following the procedures set forth in the Advanced Production Print Training Program. Engine calibration was selected and initiated after 25 warm-up sheets were run."
    Attached Files Attached Files
    Last edited by Topstep1; 09-19-2013 at 09:40 PM. Reason: added pdf attachment

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here