Thanks: 0
Likes: 0
Dislikes: 0
Just want to see if anyone else is having issues with these machines. Every other "e" series machine I get has issues within the first week. So far I've had bad MEMS, HDD's, MFPB's, and PRCB's, as well as a handful of having to perform all data clears to fix the machine. And boy does it suck installing and fixing a machine in the same week. Not a good image for my company or Konica. Is anyone else seeing these problems?
Everyone has the right to be stupid. Some people just abuse this privelage more than others
Bizhub C224e - dead SSD after around 260 copies, machine hangs during early stage of bootup process (2 grey elements of total 5 on bootscreen) - just can't load part of firmware from SSD. It's 95% BGA soldering failure because of shitty RoHS directive, as with earlier (C224 series) PWB-MFP boards.
From my experience, it is better to perform clear all data and format HDD for all e series new machine
And the HDD is not as good as before, therefore you can try physically unmount HDD and start the MFP to check whether the HDD has problem
Reply With Quote
Bookmarks