Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: c6000

  1. #1
    Junior Member kingelvis1826's Avatar
    Join Date
    May 2013
    Posts
    3
    Rep Power
    0

    c6000

    hi , I hope that someone can help me with this code c 4501 /c4502 .I tried to reset the skew adjust for printhead yellow ,did the gamma adjust ok but still the code reappear , I think its the prcb board ,plz any suggestion could help me

  2. #2
    Senior Tech 250+ Posts Mick01's Avatar
    Join Date
    Nov 2012
    Location
    Werribee Victoria
    Posts
    362
    Rep Power
    31

    Re: c6000

    Hi,
    Was both sides adjustment being performed when these codes appeared?
    Before replacing the PRCB i would perform the write unit initial position adj. This may ge tthe machine out of error.
    If this doesnt work then replace the PRCB.

  3. #3
    Service Manager 5,000+ Posts
    c6000


    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    9,940
    Rep Power
    153

    Lightbulb Re: c6000

    This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:

    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here