Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Technician Saghir377's Avatar
    Join Date
    Feb 2013
    Location
    Pakistan, faisalabad
    Posts
    43
    Rep Power
    10

    Bizhub C7000 banner printing (long sheet)

    Hi good after non to all Dear just i want to know Dip switch setting fro long sheet printing from bypass (330mm * 750mm)
    kindly help me


  2. #2
    Junior Member
    Join Date
    Oct 2013
    Posts
    3
    Rep Power
    0

    Re: Bizhub C7000 banner printing (long sheet)

    Dip switch 10.0
    set the dip switch to '1' (on)
    this then enables the banner mode function under user settings.

    Note machine must be rebooted after banner mode is activated.
    Banner mode maust be turned off and machine rebooted for normal printing


  3. #3
    Junior Member
    Join Date
    Apr 2014
    Location
    Bloemfontein
    Posts
    2
    Rep Power
    0

    Re: Bizhub C7000 banner printing (long sheet)

    Hi, I have a bizhub C6000, with finisher FS-612. I can print 300x900mm banner page but jams/ stops in finisher, and printing completed, so not stuck in fuser, just in finisher, then. I have to remove manually from finisher. Page fully printed but I can't get it to exit properly without doing manually by hand. I did change the dipswitch 10.0 so i can select sizes, just the exiting from finisher that is problem. Do you maybe have any suggestions?


  4. #4
    Junior Member
    Join Date
    Apr 2014
    Location
    leeds
    Posts
    3
    Rep Power
    0

    Re: Bizhub C7000 banner printing (long sheet)

    geralditec, you have to remove finisher to do banner printing, only supported with output tray, hope this helps


  5. #5
    Junior Member
    Join Date
    Mar 2015
    Location
    Tiffin, OH
    Posts
    1
    Rep Power
    0

    Re: Bizhub C7000 banner printing (long sheet)

    Quote Originally Posted by CMYK View Post
    Dip switch 10.0
    set the dip switch to '1' (on)
    this then enables the banner mode function under user settings.

    Note machine must be rebooted after banner mode is activated.
    Banner mode maust be turned off and machine rebooted for normal printing
    Can You please tell me where I find this dip switch??


  6. #6
    Senior Tech 250+ Posts Mick01's Avatar
    Join Date
    Nov 2012
    Location
    Werribee Victoria
    Posts
    370
    Rep Power
    16

    Re: Bizhub C7000 banner printing (long sheet)

    Hi,
    Dipswitch is acessed from service mode- system setting- software sw setting
    In regards to the finisher jamming issue. It will not jam if the paper weight is set under 135gsm. This weight range will run the engine at full process speed. Any slower it will drop to 2/3 speed and will not exit the finisher in time. If you require paper above this weight then you unfortunately have to remove the finisher.
    Hope this helps.


  7. #7
    Senior Tech 100+ Posts
    Join Date
    Jan 2014
    Posts
    103
    Rep Power
    9

    Re: Bizhub C7000 banner printing (long sheet)

    I hope the following attachment that help you.
    and also the following link.
    http://www.copytechnet.com/forums/konica-minolta/21864-bizhub-pro-c6500-banner-printing.html



    Attached Files Attached Files
    Last edited by khattab.al.masry; 03-18-2015 at 12:20 PM.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •