Bizhub C224e start button flashing amber/blue

[jrf]

Download the Km reset tool for this device. Then power up machine and select recover data and then load firmware

[dirtyfingers]

Don't use the reset tool on your original MFP board
its not to fix faults .... replace MFP ....then you can reset that one if you need to put it in another machine.

Remember all three boards talk to each other
If you reset the MFP board ..and then it turns out the PRCB was faulty
Then you have two new boards = Error on startup

I know because we had this happen.

Can you get into service mode ?
Try trouble reset - When trouble button is displayed ..then go Stop,0,0 etc