Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 22
bizhub c280
Need some help
Have a c280 that pops an error code every so often when copying
error code c2556.
Recently installed was a yellow dev unit and iu.
Plz help.
-
Technician
- Rep Power
- 31
Re: bizhub c280
We have one doing exactly the same, we have changed drum, dev unit, hopper and sub hopper and the small board that controls the toner unit yet still get the error. Only thing left for us to try is the Main Board. We are currently manually toning machine and it works for about 2 weeks.
-
Re: bizhub c280
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
-
Senior Tech
100+ Posts
- Rep Power
- 33
Re: bizhub c280
Go into service mode- State Confirm.
What is the Y toner level?
-
Technician
- Rep Power
- 22
Re: bizhub c280
good call Peter
State confirm is a great place to get info
if its 3% then its wanting more toner
Should be around 6 to 7%
Service manual says
Front side relay board (where Dev units plug in )
PRCB
drive clutches for toner drive are common (whole unit)
This is where you can manually tone up ...slowly
its slow because the clutch is slipping.
The internal clutches are the same ..so you can swap them over to test (if you feel like it )
Cheers
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks