Page 1 of 2 12 LastLast
Results 1 to 10 of 17
  1. #1
    dejanmonte
    Guest

    Konica Minolta Bizhub C220 Transfer Belt Unit replacement

    Hi,
    I have a belt problem on my Konica Minolta Bizhub C220.
    The transfer belt have a hole that is captured in the printouts. I intend to buy new belt transfer unit, but I'm not sure how to replace it. Maybe mechanical part is not so difficult to be repalced, but is there any special setting or reset to be done after unit been repalced ? Any suggestion on how to replace it will be highly appreciated. Thanks !!
    Attached Images Attached Images

  2. #2
    Master Of The Obvious 10,000+ Posts
    Konica Minolta Bizhub C220 Transfer Belt Unit replacement

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: Konica Minolta Bizhub C220 Transfer Belt Unit replacement

    Now that's a bad puncture.

    It's simple really. Remove the two screws that lock it in, slide out old unit, slide in new unit, do a gradation adjust.

    If none of these things mean anything to you you have two choices:
    1) buy a manual
    2) call a tech

    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Senior Tech 250+ Posts Phrag's Avatar
    Join Date
    Oct 2012
    Posts
    415
    Rep Power
    29

    Re: Konica Minolta Bizhub C220 Transfer Belt Unit replacement

    Quote Originally Posted by dejanmonte View Post
    Hi,
    I have a belt problem on my Konica Minolta Bizhub C220.
    The transfer belt have a hole that is captured in the printouts. I intend to buy new belt transfer unit, but I'm not sure how to replace it. Maybe mechanical part is not so difficult to be repalced, but is there any special setting or reset to be done after unit been repalced ? Any suggestion on how to replace it will be highly appreciated. Thanks !!
    Good Lord. I bet it squealed.

    I had this happen to me once too.

  4. #4
    dejanmonte
    Guest

    Re: Konica Minolta Bizhub C220 Transfer Belt Unit replacement

    Thanks a lot blackcat4866,
    Still my main doubt is about the settings/gradation adjust to be done after transfer belt unit has changed. Are there any special procedures to be carried out ? Do I really need the manual for this job or is it an easy way to do it, same like you have explained the replacement of unit.
    I have not experience in this area and maybe my questions are little or more not professional and strange. In any case many thanks for your attention and help.

  5. #5
    dejanmonte
    Guest

    Re: Konica Minolta Bizhub C220 Transfer Belt Unit replacement

    Quote Originally Posted by Phrag View Post
    Good Lord. I bet it squealed.

    I had this happen to me once too.

    Hi,

    What did you done after replacing transfer unit. Any special preocedure ??? Could you share with me your experience to fix my "precious".

  6. #6
    Service Manager 1,000+ Posts
    Konica Minolta Bizhub C220 Transfer Belt Unit replacement


    Join Date
    Feb 2010
    Posts
    1,987
    Rep Power
    75
    I don't do any adjustments. Just slide the bitch in there, go home.

  7. #7
    dejanmonte
    Guest

    Re: Konica Minolta Bizhub C220 Transfer Belt Unit replacement

    Thanks to all of you,

    The old transfer belt unit is now out of macchine. I am waiting to receive the new one soon.

  8. #8
    Junior Member
    Join Date
    Jun 2016
    Location
    kigali
    Posts
    6
    Rep Power
    0

    Re: Konica Minolta Bizhub C220 Transfer Belt Unit replacement

    hello my name is kosto i'm technician of konica but one day i received a problem to konica c224 i put new transfer belt and work 3 week but one side of it there is dust, doesn't clean very good. what the problem is it bad belt or is the problem inside the machine because that transfer belt is new

  9. #9
    Master Of The Obvious 10,000+ Posts
    Konica Minolta Bizhub C220 Transfer Belt Unit replacement

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: Konica Minolta Bizhub C220 Transfer Belt Unit replacement

    Do you have any photos or image samples? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  10. #10
    Certified Konica Expert 2,500+ Posts
    Konica Minolta Bizhub C220 Transfer Belt Unit replacement

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    North Jersey
    Posts
    4,943
    Rep Power
    216

    Re: Konica Minolta Bizhub C220 Transfer Belt Unit replacement

    are all the pins/packing material removed?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here