Jamming any paper from tray 2 and 3, right after the tray, in the door on the right, took the machine apart changed clutch , gear and sensor, still have the same problem, any suggestions? Picture shows where the paper stops.
IMG_20131097.jpg
Jamming any paper from tray 2 and 3, right after the tray, in the door on the right, took the machine apart changed clutch , gear and sensor, still have the same problem, any suggestions? Picture shows where the paper stops.
IMG_20131097.jpg
sorry picture is turned
Jam code?
Have you marked the rollers to see if they turn?
Is the door shutting properly? check the claws on the door, make sure there not broke.
Ignore my last post. Have you replaced the sensor marked 1 on this picture. It seems to me that the sensor isn't working so the vertical rollers do not attempt to turn. Can you do a sensor check on this model in service mode like the newer konicas. I would say if it doesn't respond and you know the sensor you have fitted is fine it my be the PCRB that has failed.
Screen Shot 2013-10-22 at 21.44.41.jpg
Bookmarks