Hello,
trying to set up scan to Email,but cannot! log into the admin mode in the browser and on the network tab then looking for Email tx on left hand side, not listed is there something new or is something missing?
Hello,
trying to set up scan to Email,but cannot! log into the admin mode in the browser and on the network tab then looking for Email tx on left hand side, not listed is there something new or is something missing?
does the machine have a hard drive? Is it set to INSTALLED in the service mode?
Without either of these set it will not even go to the scan screen if SCAN/FAX is pressed
If you are using Internet Explorer 10 try the compatibility view.
Are You logged in to ADMINISTRATOR mode or are you logged in as Public user?
You only get access to these options when logged in as Admin.
This it how it looks in IE11:
"Normal" view
normal.jpg
Compatibility view
compability.jpg
Last edited by B0265; 10-23-2013 at 01:15 PM.
You have "scan to Email" disabled in admin mode. Log into ADMIN at the control panel, turn scan to email on, then recheck your browser settings, you should be able to access the smtp setup. Emujo
If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.
Bookmarks