Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7

Thread: Bizhub C35

  1. #1
    Technician WRZNE's Avatar
    Join Date
    Jul 2013
    Location
    Walnut Ridge, AR
    Posts
    18
    Rep Power
    22

    Bizhub C35

    The machine had a completely new set of consumables put in it last month. It is now making copies with a pair of white or blank lines running from top to bottom. So far I have cleaned everything and made some adjustments but it still comes through when you scan or print. This is driving me half crazy so I would be grateful for any assistance you folks could supply.

  2. #2
    Service Manager 1,000+ Posts
    Join Date
    Sep 2012
    Posts
    1,129
    Rep Power
    39
    What did you clean and what did you adjust. Did you verify the laser light is not blocked. Does it happen with certain colors or all. Print halftones of each color to verify.

    Sent from my DROID BIONIC using Tapatalk

  3. #3
    Master Of The Obvious 10,000+ Posts
    Bizhub C35

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: Bizhub C35

    Quote Originally Posted by wseyller View Post
    What did you clean and what did you adjust. Did you verify the laser light is not blocked. Does it happen with certain colors or all. Print halftones of each color to verify.

    Sent from my DROID BIONIC using Tapatalk
    I agree with wseyller. We hear this every day: "I did everything ... "

    What exactly is everything? If you did everything it would be fixed, right?
    I'm thinking that the laser slit glasses are dirty. Use the wand. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  4. #4
    Technician WRZNE's Avatar
    Join Date
    Jul 2013
    Location
    Walnut Ridge, AR
    Posts
    18
    Rep Power
    22

    Re: Bizhub C35

    Quote Originally Posted by wseyller View Post
    What did you clean and what did you adjust. Did you verify the laser light is not blocked. Does it happen with certain colors or all. Print halftones of each color to verify.

    Sent from my DROID BIONIC using Tapatalk

    Took out the drums, cleaned the lasers off, cleaned all sensors. Did gradation adjust. Light is not being blocked. Also the white reference is fine.

  5. #5
    Service Manager 1,000+ Posts
    Join Date
    Sep 2012
    Posts
    1,129
    Rep Power
    39
    Print some halftones for each color. If you can, upload them here in the thread and we will give you our best recommendation.

    Sent from my DROID BIONIC using Tapatalk

  6. #6
    Technician WRZNE's Avatar
    Join Date
    Jul 2013
    Location
    Walnut Ridge, AR
    Posts
    18
    Rep Power
    22

    Re: Bizhub C35

    Quote Originally Posted by wseyller View Post
    Print some halftones for each color. If you can, upload them here in the thread and we will give you our best recommendation.

    Sent from my DROID BIONIC using Tapatalk
    Will do sadly it will have to wait till Monday.

  7. #7
    Service Manager 1,000+ Posts
    Join Date
    Sep 2012
    Posts
    1,129
    Rep Power
    39
    The built-in halftone test prints are an invaluable tool.

    If you find it happens only on one color then you know that the drum for that color is not supplying toner on the transfer belt. You can do a half stop test which means stopping the machine in mid cycle. Take out the drum at look at the drum to see if the issue is present on the drum. In your case it means the image unit is bad or the laser is not reaching the drum in the problem area. You will then eliminate many parts of the machine.

    If it happens on all colors then it is probably the transfer belt or the transfer roller. Again a half stop test will let you see the image on the belt then you may have a transfer roller issue.

    Sent from my DROID BIONIC using Tapatalk

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here