Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5

Thread: bh c220

  1. #1
    Senior Tech 100+ Posts
    Join Date
    Jul 2010
    Location
    vizag
    Posts
    114
    Rep Power
    0

    bh c220

    hello engineers
    i am facing a problem in my costomers machine bh c220.bypass feed roller is continuosly rotating,so papers are going inside continuously and getting paper jam.

    why feed roller continuosly rotating,i cleand feed clutch also.

  2. #2
    Field Supervisor 2,500+ Posts
    Join Date
    Jun 2009
    Posts
    3,009
    Rep Power
    96

    Re: bh c220

    Electrically disconnect the feed clutch, if the roller stops rotating then you have a PRCB problem, or a short in the low active wire. Emujo
    If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

  3. #3
    Master Of The Obvious 10,000+ Posts
    bh c220

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: bh c220

    Quote Originally Posted by emujo View Post
    Electrically disconnect the feed clutch, if the roller stops rotating then you have a PRCB problem, or a short in the low active wire. Emujo
    Conversely, if the shaft still rotates after you've disconnected it electrically, you've got a seized clutch. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  4. #4
    Senior Tech 100+ Posts
    Join Date
    Jul 2010
    Location
    vizag
    Posts
    114
    Rep Power
    0

    Re: bh c220

    Quote Originally Posted by blackcat4866 View Post
    Conversely, if the shaft still rotates after you've disconnected it electrically, you've got a seized clutch. =^..^=


    i removed connection then cheaked.clutch still rotating so i desided as clutch was stucked

    thanks for responded engineers

  5. #5
    Service Manager 5,000+ Posts
    bh c220


    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    9,940
    Rep Power
    153

    Lightbulb Re: bh c220

    This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:


    http://www.justmanuals.com


    paul@justmanuals.com

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here