Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Technician
    Join Date
    Feb 2011
    Location
    thessaloniki
    Posts
    10
    Rep Power
    27

    application error jobcentro in ic601

    I have a problem with the jobcentro.The machine is konica 6000 and the controller the ic601.When i finish the installation process and i try to connect to the machine with ip address and 30081 port.Then i see a application error message.When i push the ok button I can see the configuration of the machine i can .see the process jobs they coming to the machine but when i try to go to the "main body hold/hdd" tab i have an application error. All of these functions work correctly in the display screen of the machine namely revocation work from Holt and change data.I installing the 1.0021 version of the jobcentro

  2. #2
    Senior Tech 100+ Posts
    Join Date
    Jun 2008
    Posts
    192
    Rep Power
    34

    Re: application error jobcentro in ic601

    Try to enable Support storing PPD Job to Controller HDD
    Go to:
    [Utility] - [03 Administrator Setting] - [Controller] - [03 System Setting] - [01 Software Switch Setting]

    SoftSW- 28 from 0 to 1

    Good luck.

  3. #3
    Technician
    Join Date
    Feb 2011
    Location
    thessaloniki
    Posts
    10
    Rep Power
    27

    Re: application error jobcentro in ic601

    Quote Originally Posted by kalindd View Post
    Try to enable Support storing PPD Job to Controller HDD
    Go to:
    [Utility] - [03 Administrator Setting] - [Controller] - [03 System Setting] - [01 Software Switch Setting]

    SoftSW- 28 from 0 to 1

    Good luck.
    Thank you very much I'll try tomorrow

  4. #4
    Technician
    Join Date
    Feb 2011
    Location
    thessaloniki
    Posts
    10
    Rep Power
    27

    Re: application error jobcentro in ic601

    Finally the problem was that the version of ic-601 was 25 and the jobcentro 1.0201.The solution is to downgrade the version of the ic 601 to version 22.If you try to upgrade to version 31 you will have the same problem.Maybe if we put a more upscale version of jobcentro we need to upgrade and controller to version 25 or 31.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here