Thanks:
0
Likes:
0
Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 27
bizhub 25e shows sometimes stripes whenn scanning
Hello at all,
A bizhub 25e showes stripes. But only when scanning (local copy over scanning glass or scan to PC, not by copying over the normal original glass-plate).
When printing, this symptom does not occur. This error also occurs only rarely but repeatedly. The Helpdesk-Hotline (only for technicians) from Konica Minolta Europe knows no solution, except that I should replace the CB-board.
Any ideas?
bizhub 25e.jpg
Last edited by Laserbeam; 10-31-2013 at 11:25 AM.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks