Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 27
6501 jamming issue
Have a 6501 with a jamming issue coming out of trays 4 and 5. The jam code is J-1607. I tricked the door open so that i could watch it run and I can see that the roller right outside of tray 5 never turns. I replaced the clutch on the back side of it. The shaft seems to be find. The brass bushings look fine. Still can not seem to nail this problem down. Anyone have any more ideas?
-
Re: 6501 jamming issue
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:
www.justmanuals.com
paul@justmanuals.com
-
Technician
- Rep Power
- 27
Re: 6501 jamming issue
Originally Posted by
JustManuals.com
No thanks. I get my manuals legally
-
Re: 6501 jamming issue
Hi,
Have you tried the clutch in I/O mode?
Check you are getting 24v from the PFU drive board to the clutch.
Hope this helps
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks