Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Technician
    Join Date
    Apr 2011
    Posts
    43
    Rep Power
    27

    6501 jamming issue

    Have a 6501 with a jamming issue coming out of trays 4 and 5. The jam code is J-1607. I tricked the door open so that i could watch it run and I can see that the roller right outside of tray 5 never turns. I replaced the clutch on the back side of it. The shaft seems to be find. The brass bushings look fine. Still can not seem to nail this problem down. Anyone have any more ideas?

  2. #2
    Service Manager 5,000+ Posts
    6501 jamming issue


    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    9,940
    Rep Power
    153

    Re: 6501 jamming issue

    This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:


    www.justmanuals.com


    paul@justmanuals.com

  3. #3
    Technician
    Join Date
    Apr 2011
    Posts
    43
    Rep Power
    27

    Re: 6501 jamming issue

    Quote Originally Posted by JustManuals.com View Post
    This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:www.justmanuals.compaul@justmanuals.com
    No thanks. I get my manuals legally

  4. #4
    Senior Tech 250+ Posts Mick01's Avatar
    Join Date
    Nov 2012
    Location
    Werribee Victoria
    Posts
    362
    Rep Power
    31

    Re: 6501 jamming issue

    Hi,
    Have you tried the clutch in I/O mode?
    Check you are getting 24v from the PFU drive board to the clutch.
    Hope this helps

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here