Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    Trusted Tech 50+ Posts JOEBOOROCKSYOU's Avatar
    Join Date
    Jan 2008
    Posts
    85
    Rep Power
    33

    Toner / developer adj biz hub 600

    getting ready to do a full pm on a 600 first time out.. machine has 300k on it..

    manual says nothing about mix ratio or simulation run...

    i can't believe its just add dv and go..

    any help would be appreciated.


    thanks,



    Joe

  2. #2
    Field Supervisor 2,500+ Posts
    Join Date
    Jun 2009
    Posts
    3,009
    Rep Power
    96

    Re: Toner / developer adj biz hub 600

    It's not, if you have the SM look at the section that shows what adjustments to run after replacing xxx. There are about 5 things that need to be done, including reset your developer count. Emujo
    If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

  3. #3
    Trusted Tech 50+ Posts JOEBOOROCKSYOU's Avatar
    Join Date
    Jan 2008
    Posts
    85
    Rep Power
    33

    Re: Toner / developer adj biz hub 600

    i know about the reset , and firmware is up to date.. i see nothing on adj thru simulation though.

    what page on the SM are you seeing it..?

    thanks..


  4. #4
    Aging Tech 10,000+ Posts
    Toner / developer adj biz hub 600

    copier addict's Avatar
    Join Date
    Jul 2013
    Location
    Diamond
    Posts
    11,919
    Rep Power
    323

    Re: Toner / developer adj biz hub 600

    Quote Originally Posted by JOEBOOROCKSYOU View Post
    i know about the reset , and firmware is up to date.. i see nothing on adj thru simulation though.

    what page on the SM are you seeing it..?

    thanks..

    It is under "Drum Peculiarity". Run "Cartridge Set" first, then run the rest in order, from "Blade Set".

  5. #5
    Service Manager 1,000+ Posts
    Join Date
    Sep 2012
    Posts
    1,129
    Rep Power
    39
    There are two in there you don't want to run. LD bias 1& 2 I think they are. Manual says those are set at the factory and are not to be performed in the field.

    Sent from my DROID BIONIC using Tapatalk

  6. #6
    Aging Tech 10,000+ Posts
    Toner / developer adj biz hub 600

    copier addict's Avatar
    Join Date
    Jul 2013
    Location
    Diamond
    Posts
    11,919
    Rep Power
    323

    Re: Toner / developer adj biz hub 600

    Quote Originally Posted by wseyller View Post
    There are two in there you don't want to run. LD bias 1& 2 I think they are. Manual says those are set at the factory and are not to be performed in the field.

    Sent from my DROID BIONIC using Tapatalk
    Yes, sorry, I forgot about that exception. Thanks

  7. #7
    Senior Tech 100+ Posts PeterG's Avatar
    Join Date
    Jul 2008
    Location
    Bendigo
    Posts
    177
    Rep Power
    33

    Re: Toner / developer adj biz hub 600

    Quote Originally Posted by JOEBOOROCKSYOU View Post
    getting ready to do a full pm on a 600 first time out.. machine has 300k on it..

    manual says nothing about mix ratio or simulation run...

    i can't believe its just add dv and go..

    any help would be appreciated.


    thanks,



    Joe
    You are in for an education. Until you get your head around them, these things are a bit of a dog. Once you understand them you kind of love em like an ugly kid. Everyone makes fun of them, but overall they are a good honest workhorse. Don't try and take shortcuts with the maintenance. If you do, it will bite back like a rabid dog.

  8. #8
    Field Supervisor 2,500+ Posts
    Join Date
    Jun 2009
    Posts
    3,009
    Rep Power
    96

    Re: Toner / developer adj biz hub 600

    Page 257, under the drum, developer, etc, the column below shows you what adjustments to run. Feel free to tell me how bad you feel when you realize it was right in front of you....Emujo
    If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here