Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Technician
    Join Date
    Jul 2010
    Location
    Edinburgh
    Posts
    44
    Rep Power
    0

    'correctly position paper in bypass tray' error

    We've got an issue printing compliment slips from the bypass tray on a couple of bizhubs (C360 and C280). The slips we use are a non-standard size, 210mm x 99mm, but we did get them to print ok last week. However, we now can't get them to print but I don't know what haschanged and, no matter what I try, I can't get past the 'correctly position paper in the bypass tray' error on the machine placing the slip with the short side feeding in. If I turn the paper around with the long side feeding it proceeds to print but doesn't get far 'jamming' at the right-side fuser unit.

    We last had it working using the settings below and I'd really appreciate any assistance to get it working again.

    Word Document
    Page Orientation: Landscape

    Print Driver
    Original Size (My Tab): A4
    Paper Size (My Tab): Custom (Width: 99.0mm Length: 210mm)
    Original Size (Basic Tab): A4
    Paper Size: (Basic Tab): Custom Size
    Zoom: Manual (100%)
    Paper Tray: Bypass Tray
    Paper Type: Plain Paper


  2. #2
    Aging Tech 1,000+ Posts
    'correctly position paper in bypass tray' error


    Join Date
    Jul 2013
    Location
    Desboro
    Posts
    1,140
    Rep Power
    30

    Re: 'correctly position paper in bypass tray' error

    Do you have the bypass tray set up as a custom size on the machine as well?


  3. #3
    Technician
    Join Date
    Jul 2010
    Location
    Edinburgh
    Posts
    44
    Rep Power
    0

    Re: 'correctly position paper in bypass tray' error

    Quote Originally Posted by copier addict View Post
    Do you have the bypass tray set up as a custom size on the machine as well?
    I did try this earlier today but the custom size was not available when I went to 'Paper Tray Setting' at the error screen. It is available now though - I just went to test again - and it prints fine when the custom entry is selected. This does require user input at the printer but I'm sure we can live with that.

    Many Thanks


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •