Thanks: 0
Likes: 0
Dislikes: 0
Hi guys. Some colleagues with a KM Bizhub C200 are getting these multiple evenly spaced lines when only when photocopying color, not when printing from computer or memory. They've changed the entire scanner unit and its still the same. Anyone come across this, and any ideas ? Sample attached (I hope),
Re: Bizihub C200
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
http://www.justmanuals.com
paul@justmanuals.com
Not sure what is exactly meant by changing the entire scanning unit. I'm assuming that would include the CCD and whole nine up top. I'm thinkin a bad connection or bad board... this attached page might give some help or guidance.
yes, the whole thing. Not sure whats going on here, but yours, and other attachments are not opening lately. Is it just me with this problem ?I'm assuming that would include the CCD and whole nine up top
I don't remember if the connection for the main body is the male end or female end for the scanner. Maybe check for bent pin's but that will usually give you a background of one color. Try swapping ram with another machine.
Color is not 4 times harder... it's 65,000 times harder.They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.
It looks like the lines of shame. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
I miss the Like button.Originally Posted by blackcat4866
Color is not 4 times harder... it's 65,000 times harder.
Please elaborate...............?It looks like the lines of shame. =^..^=
Last edited by andy227; 11-19-2013 at 04:37 PM.
The "Lines Of Shame" are what you get when you do not do a complete setup on a Konica Minolta color MFP.
Some people think: "I can just skip a bunch of those steps .. they're not really necessary." If you skip some of the steps in calibrating, the machine will print lines at ~10mm intervals in the feed direction. It's Konica Minolta's way of saying: Dumbass! Do it right!
The cure is to find yourself a setup checklist. Start at the point where you plug in the machine. Do all the steps from there on.
The lines are usually magenta or cyan, but I understand that they can also be yellow or black.
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Guess I've always set mine up correctly and have never seen um!! ha ha!
Color is not 4 times harder... it's 65,000 times harder.
Posting Permissions
Reply With Quote
Bookmarks