IMG_20131125_123436_002.jpgHi All. I just picked up a Konica Minolta Bizhub C253 with about 125K on the counter. When I bought it, the seller said it needed a new "fuser roller" and thought the roller was disintegrating because red waxy material was coming off it. I've ordered a new fuser, but it'll take a couple of weeks to come and wonder if I can get this one up and running. It looks to me that the fuser isn't getting hot enough to melt the wax in the color toner and is gumming up the rollers. I've tried to go into service mode and tried both increasing and decreasing the fuser temperature, to no avail. Any suggestions?
Bookmarks