well bizhub 163 if l started there this machine this error code appeared there C05000....and this machine Extinguished alone....l trying controlled the fusion parts but all is good ...please help
well bizhub 163 if l started there this machine this error code appeared there C05000....and this machine Extinguished alone....l trying controlled the fusion parts but all is good ...please help
BEST TECHNICIAN . NICE PEOPLE .
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
http://www.justmanuals.com
Paul@justmanuals.com
There is no C05000 in this machine. However C0500 means warm-up failure of fuser unit. Reset by holding the Stop Key down at the same time switch the Power Switch on.
Hans
" Sent from my Intel 80286 using MS-DOS 2.0 "
Check the switch for the right door, it is not actuated, on the rear of mashine
well excuse me ...l wrong ..the error code is C0500 ...l know it have warm-up failure ..l trying controlled the fusion section parts ...but it is very good ....please it have any idea to raster this error code how can enter in mode save ??
BEST TECHNICIAN . NICE PEOPLE .
.....and see what happens if it returns.Reset by holding the Stop Key down at the same time switch the Power Switch on.
Hans
" Sent from my Intel 80286 using MS-DOS 2.0 "
You can reset this problem by pressing the following buttons:utility key-stop 00 stop 01 then trouble reset,then do the reset.
hello all ..l informed you l solved my problems ....l taken my finger fix to stop long 5 second l started switch of copiers any all is very good ...thanks very good to all technician help me ...
BEST TECHNICIAN . NICE PEOPLE .
Just curious to know: Is this a direct translation from Arabic or French through Google Translate or does Zaza have a minor Frimwar problem......hello all ..l informed you l solved my problems ....l taken my finger fix to stop long 5 second l started switch of copiers any all is very good ...thanks very good to all technician help me ...
Hans
" Sent from my Intel 80286 using MS-DOS 2.0 "
[QUOTE=Hansoon;392666]Just curious to know: Is this a direct translation from Arabic or French through Google Translate or does Zaza have a minor Frimwar problem......
Hans[/QUOT
what's happend friend hans ...
BEST TECHNICIAN . NICE PEOPLE .
Bookmarks