I have Issue when we printing through the copier, I change the Drum unit, Transfer belt, Still the Problem is same, I attached the image below , please any one help me
I have Issue when we printing through the copier, I change the Drum unit, Transfer belt, Still the Problem is same, I attached the image below , please any one help me
Do you have a good image formation on transfer belt before transfered on paper?What Drum Unit did u changed?there ar 4 and the issue appear on all colors at the same place/feeding direction
Defects are simple, our mind is complicated
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
http://www.justmanuals.com
Paul@justmanuals.com
stop it before it gets to the fuser make sure the image is good on the paper that is not fused.
Fuser may be torn up, the fuser rollers tare...
What model are you running??
Hello,
did you clean transfer belt with alcohol or etc?
Gürkan.
Bookmarks