It's looking like these erratic codes are being caused by communication errors. The SSD bd, HDD and MFP communicate back and forth with each other and if anything goes wrong you get these errors. If your MFP is working print out the list print and look on the last pages for some odd looking alphanumeric abort codes and instantaneous failure codes. If you are getting these, and you feel lucky, de-install the HDD, format the SSD board, re-install HDD and format (logical on both), then do a complete data clear. You will have to re-enter a lot of settings, so keep track of LK info, vcare, network settings and so on, and of course re-load of firmware and movie data. Sounds like a lot, but if the SSD board goes bad you will be doing this anyway. Another trick (if you can get the MFP to come up) is to hold the power save button and power on. This will force the diagnostic mode to run and you can see if you are getting any other kind of failures. EMujo
Bookmarks