With What You Have Replaced Already, Try Replacing The Drum (oem) And The Developer At The Same Time. Reset Counters And Rerun Tcr Adj. I Have Seen Non Oem Drums Cause This Problem.
With What You Have Replaced Already, Try Replacing The Drum (oem) And The Developer At The Same Time. Reset Counters And Rerun Tcr Adj. I Have Seen Non Oem Drums Cause This Problem.
With All You Have Replaced, Try Replacing The Drum With An Oem Drum And New Developer. I Have Seen Non Oem Drums Cause This Problem..also If Your Black Patch Dont Appear You Can Get Funky Errors To Developer.
Thanks "itchy" , yes, I will be doing a backt to basics call monday morn. Strip machine down and start from scratch, etc. Copier has only done 135,000, have already replaced starter at 135,000. Strange that everytime i change something fault goes and then comes back. Probably dodgy toner mechanism somewhere. Have experienced weird faults before on another Biz500 but that one had runup 257,000 copies. Once drum, starter, etc, had been changed and counters cleared, no problems at all apart from fuser drive gears chewing out at the 400,000 mark. But that's another story.....
We have the same problem can you remember what fixed it in the end.
I had a 2803 and found the toner addition solenoid was not energizing. Had to replace the printer control board and the toner addition solenoid (SD5), then had to flash it.
Have you check to see what error 5 is. There was a chart on KonicaMinolta website that explained what each error meant. Just a thought.
I have a bizhub 500 with an error code of C2309, does anyone know what this is?
Thanks
We are a manufacturer of toner chip and toner cartridges for laser printer . please check our price list at your attachment!
To tell you a good news,now we have worked out many new chips with almost the best quality in China,Such as Samsung SCX-4828,OKI B4500,OKI 2200,OKI 2400,OKI 4400,OKI 4600,OKI 4100DN,OKI 4300DN, Samsung ML-1640,Samsung CLP-315 and Samsung CLP-310,Samsung SCX-4300,Samsung ML-2240 printer mainboard chip,Olivette D.COPIA 300MF ,M200chip,Epson Aculaser M2000D toner chip,KyocerA TK-710/TYK-712 chip,Samsung CLP-350 ,HP Black Universal chip,HP 1600/2600,3600,Kyocera Kyocera TK-715,675,130,140,310,312,320,322,330,332 etc chip,HPC1215 chip,Lexmark C522 chip,Samsung CLP-300 chip ,Xerox C1110/Dell 1320 chip,HP 36A ,Epson 2600,HP 2020,HP 2025,HP 2035,HP 2055 ,HP P4014,HP P4015 ,Xerox DC7760 toner chip and Xerox Phaser 7760 drum chip etc...
www.printercolorltd.com
check the home position sensor for the toner bottle.make sure its clean and in position.otherwise you need to modify the toner bottle mechanism so that the notch actuates the sensor properly
Bookmarks