You mean G20-R6, latest mass production firmware available on infohub will allow to make soft switch changes?
51 hex D0? on bizhub c220 and after, hex F0 is making no yield even for iu or transfer belt.
You mean G20-R6, latest mass production firmware available on infohub will allow to make soft switch changes?
51 hex D0? on bizhub c220 and after, hex F0 is making no yield even for iu or transfer belt.
You need later F/W to allow you to make the changes to the softswitches, otherwise they'll never let you hit "Fix" and stay where you set them.
Also, the latest bulletin shows exactly which softswitches/changes in service mode need to be changed for that particular model. If you need the bulletin,
I'll try to figure out how to upload it here...??
OC
Yes, simply load the Mass production firmware from Info Hub then you'll be able to change the HEX settings. 51-D0 55-0C
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Bookmarks