Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Junior Member
    Join Date
    Dec 2011
    Posts
    2
    Rep Power
    0

    C454E displaying C-4802 error code

    This code comes up when replacing printer pcb. The manual says this is normal just go into service mode and load firmware problem is cannot get into service mode. This issue occurred after unsuccessfully trying SSD mod and so we have a mismatch of SSD ,MFP and printer pcb. Any ideas welcome and thank you in advance

  2. #2
    Technician
    Join Date
    Sep 2010
    Posts
    19
    Rep Power
    28

    Re: C454E displaying C-4802 error code

    Any luck with this error code?

  3. #3
    Technician
    Join Date
    Aug 2014
    Location
    Little Rock, AR
    Posts
    22
    Rep Power
    20

    Re: C454E displaying C-4802 error code

    Why can't you get into the service mode? Is it because you don't know how or some technical issue? If it's the former:

    Press "Counter" button.
    Open up the keypad by pressing the button on the top left corner of the screen.
    Now, press STOP, 0, 0, STOP, 0, 1.
    When prompted for the password enter 9272927292729272

    This is just from memory so I might've missed something. However, this is enough info for you to get it done. Hope this helps almost a year after the fact...

  4. #4
    RTFM!! 5,000+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    5,372
    Rep Power
    151

    Re: C454E displaying C-4802 error code

    Why do you need to goto service mode just load the firmware. This could happen if you don't enter the machine and type data when changing boards.

    goto counter do "S" 0 0 "S" 0 1 then dont enter CE password but "S" 0 "C"
    Look for CE password reset code. send picture of the screen to OEM and receive reset code.
    And then you will probably get a HDD password lock.
    Last edited by allan; 04-22-2015 at 12:29 AM.

  5. #5
    Senior Tech 250+ Posts jotunn's Avatar
    Join Date
    Jan 2010
    Posts
    406
    Rep Power
    46

    Re: C454E displaying C-4802 error code

    The problem with this code is that procedure says that you need to go to service mode and perform [Engine Data Reflect Mode] - however when you play with boards and SSD in most cases you can't even get into service mode with proper password. Moreover, you can sometimes get into service mode through trouble reset screen but [Engine Data Reflect Mode] may be not available.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here