Neither bulletin #s can be found.
To me...... the paper present actuator with the added magnet is one of the best resolves for 66-02.
Only occurs when utilizing the 70 OPM option during scanning.
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Actuator = A3CFPP4VOO
Magnet = A3CFPP1700
See my post on 66-02 jams for this feeder. The left cover (lid) is warping upward. When it reaches about 25mm or more from the original table to the underside of the cover, the paper empty flag is too high and the angled area no longer hits the feed tires shaft at it's bent spot. This makes it bounce and read another false page, then tried to feed against the black felt friction pads. Our shop fix is applying about 39 lbs of weight to the feeder lid for a week or two, then put it out in the field. So far they have not warped back up. Any lid 23~24mm is fine. 25+ you will get 66-02 jams after last page is fed.
Prove it by simply pressing down with medium pressure on the cover. It won't fail! I posted slo no video proving this fix. The magnet in the actuator is just a band aid.
Bookmarks