Machine indicates "Stabilizing image" and never comes to the Ready state. No error code indicated. Any ideas?
Machine indicates "Stabilizing image" and never comes to the Ready state. No error code indicated. Any ideas?
¿Tienen toner los cartuchos?
¿El nivel de revelador es el adecuado?
Tube un problema similar en un C450 y era por el fusor, no calentaba.
####=============================####
Do toner cartridges?
Levels developer is right?
A similar problem on a C450 and was by the fuser not warming
It has been awhile, did you find a resolution to the "stabilizing image" message on the C451? I have a C650 doing the same thing. I have replaced transfer belt, all IUs, IDC sensors, print head relay board, print head, memory modules and hard drive. Next step is to push it off the roof.
Thanks
Bookmarks