Thanks:
0
Likes:
0
Dislikes:
0
-
Bizhub C250 Hour glass
Hello all,
I have a Develop Ineo+ 250 which is the same as the KM Bizhub C250.
My machine stuck on the hour glass when power on.
After contact with a company, they advised me to unplug the Hard Disk Drive, and Change the Memory, this didn't had any impact .
Now i read often that this is a firmware error or NVRam problem.
Is here someone who could help me with this problem or getting the firmware for this machine to fix the problem?
I read the old topic: C250 with hourglass after power failure
Which is outdated yet, and the download doesn't work anymore.
To not bump a old thread i started a new one.
Thanks in advance.
-
Re: Bizhub C250 Hour glass
is the lcd backlight lit or off ?
i've had this caused by the pwb-m board (no backlight) and the NVRam (backlight on)
You will know if its the pwb-m board as fw reloading will either never start at all or never complete the printer stage
-
Re: Bizhub C250 Hour glass
First of all Thanks for the reply,
The LCD backlight is ON, and turns off after 6 minutes.
-
Re: Bizhub C250 Hour glass
Just sent you the C250 firmware, try that you might be lucky, let me know.
-
Re: Bizhub C250 Hour glass
yep, its not your pwb-m board.
you may be lucky with a firmware reload.
Failing this try the nic initialize first before the nvram initialize as i've had nic corruption cause this before too.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks