Konica Minolta Bizhub C353

[mearmi]

Got one Bizhub C353 with light Copies. When need to do gradation it doesn't work as it shows Stablizer NG.

Print is acceptable, only copies are very light. (Completely Serviced-Mirrors etc.)

Any advice.

Thanks a lot.

mearmi

[EarthKmTech]

if its saying stabilizer NG there will be a reason for it.

goto the warnings counter and see what P codes its complaining about and this will help you.

There will also likley be an oil can at the bottom of the normal screen with a P code in it too.

[mearmi]

if its saying stabilizer NG there will be a reason for it.

goto the warnings counter and see what P codes its complaining about and this will help you.

There will also likley be an oil can at the bottom of the normal screen with a P code in it too.

Thanks a lot for your reply.

P5 is there. Please advise what is that for?


kind Regards

[ck1]

Thanks a lot for your reply.

P5 is there. Please advise what is that for?


kind Regards

You need clean the IDC sensor ( front ) .better clean both side