Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Field Supervisor 500+ Posts
    Join Date
    Jun 2010
    Location
    folsom
    Posts
    519
    Rep Power
    33

    Bizhub 600 web advance

    Trying to adjust web advance for every copy, only strike for every 5 copies! any help would be great!

  2. #2
    Senior Tech 100+ Posts
    Bizhub 600 web advance

    havokprod's Avatar
    Join Date
    Oct 2012
    Location
    Los Angeles CA
    Posts
    136
    Rep Power
    27

    Re: Bizhub 600 web advance

    Reset the Web counter in Tech Rep... It will advance the web every copy. For a while anyways.

  3. #3
    Field Supervisor 500+ Posts
    Join Date
    Jun 2010
    Location
    folsom
    Posts
    519
    Rep Power
    33

    Re: Bizhub 600 web advance

    Quote Originally Posted by havokprod View Post
    Reset the Web counter in Tech Rep... It will advance the web every copy. For a while anyways.
    Thanks, I have been fighting with this machine in one way or another for the last 6 months!!! last week I went to the call for toner dumping and I had replaced the toner recovery roller and today I got a call back for jamming! (The tab that sit on the recovery roller on the back is,I'm guessing is a bias connector)? the customer showed me examples of toner smeared on a page and I ran about 200 pages and it started double imaging and the leading edge had a build up! The toner does not smear, seems to be fixing, but is it cleaning? I had rebuild the fuser about a year ago so it has new UFR,LFR,Bearings,claws and a web and there is no adjustment for pressure and I checked the drum and saw no lines, and seemed to be cleaning! A few months back I had to put a new UFR, developer change and a drum blade (generic blade) in the machine due to a generic toner issue they were having. so what I plan to do is replace the drum blade with an OEM type and take out another fixing assembly to see if that fixes the problem, or is there bad toner again! After replacing the toner recovery roller this started to happen, but it's not dumping toner any longer? any suggestions would be awesome! Thanks

  4. #4
    Field Supervisor 2,500+ Posts
    Join Date
    Jun 2009
    Posts
    3,009
    Rep Power
    96

    Re: Bizhub 600 web advance

    Many of our guys disconnect the power to the toner conveyance roller clutch. It will keep the roller turning all the time. Emujo
    If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

  5. #5
    Field Supervisor 500+ Posts
    Join Date
    Jun 2010
    Location
    folsom
    Posts
    519
    Rep Power
    33

    Re: Bizhub 600 web advance

    Quote Originally Posted by emujo View Post
    Many of our guys disconnect the power to the toner conveyance roller clutch. It will keep the roller turning all the time. Emujo
    Yes, I set the dip switches so it will drive all the time! I'm just trying to figure out why it's double imaging and leaving streaks of toner on the pages. You can even see it if you run 20 to 30 sheet if you look at the leading edge!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here