Thanks: 0
Likes: 0
Dislikes: 0
NVRAM Full
I am using some software to monitor our equipment via SNMP and other methods to keep on eye on the overall health of my network. Anyways my question is that my monitoring software is saying that the Konica Minolta Bizhub C554 NVRAM is full. Its has a 2MB NVRAM and is always 100%. Should I be concerned about this?
The amount of data being stored on the NVRAM is constant. No image data is ever written to the NVRAM, it holds engine reference data only.
The short answer is No, you've got no worries. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Re: NVRAM Full
Thank you.
Not to mention that the memory indicator counts down...If you start to see 10% than I would be concerned about a RAM issue. Emujo
If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.
Posting Permissions
Reply With Quote
Bookmarks