Auto Booklet Option

[halbrandenburg]

By default, on the Bizhub E series machines, when using the copier, if you choose to do a fold and center staple option, by default, the machine assumes the booklet option. Where is the setting to turn that option off so the booklet feature is not implemented automatically? I don't have a saddle stitch finisher available to dig around.

[emujo]

Look under "functions" for booklet. This may be defaulted to on. Emujo

[halbrandenburg]

Look under "functions" for booklet. This may be defaulted to on. Emujo

Thanks EMUJO. I know the option is ON, I just don't know where the option is located to turn it off as a default, somewhere in the USER SETTINGS I reckion. But I did not have a machine to look for it. Not sure where the "functions" is you mention. I'll post the answer when I get access to a finisher that folds and staples.

[habik]

Copy settings>factory default ( instead of current settings)


Sent from my iDon't believe in marketing device using Tapatalk

[halbrandenburg]

Copy settings>factory default ( instead of current settings)

Hmmmmm

[B0265]

Utility - User Settings - Copier Settings - Auto Booklet Selection for Saddle Stitching

[emujo]

Set the copier up the way you want it, then go to user mode, copier settings, default settings and choose current settings. Emujo

[halbrandenburg]

Set the copier up the way you want it, then go to user mode, copier settings, default settings and choose current settings. Emujo

That works too...