Thanks:
0
Likes:
0
Dislikes:
0
-
Copier Guardian
- Rep Power
- 20
Rebuilding c351c/c450 fusing units.
So I have a client who has a C450 with a de-laminated pressure roller. I have found a few places that has lower pressure rollers for sale but figured I would ask, what is more reliable and better in terms of service life? OEM complete fusing unit for the outrageous price, or to rebuild just the lower roller with a compatible roller?
Machine has just shy of 480k total counter. I have already reset the fuser unit a few months ago.
Thanks
-
Re: Rebuilding c351c/c450 fusing units.
A new oem fuser out of the box is going to be more reliable hands down.
Do the new rollers come with a set of bearings ? These seem to be shot around the same time as the oem rollers.
-
Re: Rebuilding c351c/c450 fusing units.
I agree, bite the bullet & replace the complete OEM fuser, but first maybe check that the customer isn't planning on upgrading any time soon, that happens a lot at my company, I fit a full set of IU's & fuser etc, month later customer has upgraded to a new machine! ££££££££ down the drain!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks