need help please, the machine is operating normally, and this morning all yes and toner undetected on Minolta C203, it returns a message saying that we must put IU and toner when I replace the same problem,
thank you.
need help please, the machine is operating normally, and this morning all yes and toner undetected on Minolta C203, it returns a message saying that we must put IU and toner when I replace the same problem,
thank you.
I would assume blown icp on prcb from/or a shorted tc or iu chip contact pin.
Have you just changed a toner or IU? I have seen similar things when data on one of the chips is corrupt.
if so try changing it again.
Paul.
Does KM have a place in the service mode where they designate what brand or badge will be displayed? Let's say it's designated as an Oce' and you've installed KM IU's and toners. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
IU lot number it's shown in service mode?
Defects are simple, our mind is complicated
is it saying they arent inserted OR they are the incorrect type ?
If my memory is to be relied on, I seem to recall that this can be caused by bent, "shorting" contacts on one of the image units!
Bookmarks