Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 9 of 9
  1. #1
    Master Of The Obvious 10,000+ Posts
    KM bizhub C454e display On for 5 seconds, Off for 5 seconds, On for 5 seconds, etc.

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    KM bizhub C454e display On for 5 seconds, Off for 5 seconds, On for 5 seconds, etc.

    It never boots up. You get the two shark fins, and that's it.

    I've tracked it back to:
    Main Relay Signal: 0.07vdc ON to 4.88vdc OFF (CN3-7 @PRCB, CN009-6 @PS)
    Driver Relay2 Signal: 0vdc ON to 5.21vdc OFF (CN3-5 @PRCB, CN009-8 @PS)

    It loses all the 24.2vdc supply voltages for 5 second intervals. Removing all the 24 volt loads doesn't make any difference, so I do not suspect a dead short.
    The 5.1vdc supply voltages stay steady.

    I came to the conclusion that the PRCB circuitry that controls the relays has failed. Can anybody confirm my theory? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  2. #2
    Step aside, noob 1,000+ Posts EarthKmTech's Avatar
    Join Date
    May 2009
    Location
    Gigety
    Posts
    2,141
    Rep Power
    75

    Re: KM bizhub C454e display On for 5 seconds, Off for 5 seconds, On for 5 seconds, et

    Are you sure your not just experiencing a failed SSD ?

    endless Self restarting at double shark fins are the symptoms.

    I would replace the SSD before going any further.

  3. #3
    Vulcan Inventor of Death 1,000+ Posts Mr Spock's Avatar
    Join Date
    Aug 2006
    Location
    tampa,fl
    Posts
    2,067
    Rep Power
    63

    Re: KM bizhub C454e display On for 5 seconds, Off for 5 seconds, On for 5 seconds, et

    usually this is the ssd (nvram to us older folk) that has gone deep south. You will need an open ticket with SSD and an act of god to get a new one.
    And Star Trek was just a tv show...yeah right!

  4. #4
    RTFM!! 5,000+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    5,387
    Rep Power
    152

    Re: KM bizhub C454e display On for 5 seconds, Off for 5 seconds, On for 5 seconds, et

    Jip SSD. Must read manual before you swop any boards on this beast. Do not use a used SSD!! Then load all firmware in the Right odder. then make sure SSD update is done ver 6.05 .

  5. #5
    Field Supervisor 2,500+ Posts
    Join Date
    Jun 2009
    Posts
    3,009
    Rep Power
    96

    Re: KM bizhub C454e display On for 5 seconds, Off for 5 seconds, On for 5 seconds, et

    Bad SSD board usually results in the MFP re-booting shortly after power on. In my cases, the MFP never made it to the 2 pillars (shark fins). But I would try the SSD update tool 1st, this will get the SSD board to latest version and tell you if it has a problem. After SSD update, you must reload latest firmware. I would also look at the machine type selection at the 1st screen to be sure you don't have the wrong board type selected. If all this fails, my next step would be SSD board, then MFP board. Emujo
    If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

  6. #6
    Senior Tech 100+ Posts francisco's Avatar
    Join Date
    Nov 2009
    Location
    porto
    Posts
    168
    Rep Power
    32

    Re: KM bizhub C454e display On for 5 seconds, Off for 5 seconds, On for 5 seconds, et

    same problem

    replace SSD and load new firmware fix it

  7. #7
    Master Of The Obvious 10,000+ Posts
    KM bizhub C454e display On for 5 seconds, Off for 5 seconds, On for 5 seconds, etc.

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: KM bizhub C454e display On for 5 seconds, Off for 5 seconds, On for 5 seconds, et

    Somehow I'd managed to avoid changing SSD's up until now. Thanks for all the responses. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  8. #8
    Service Manager 1,000+ Posts
    Join Date
    Sep 2012
    Posts
    1,129
    Rep Power
    39

    Re: KM bizhub C454e display On for 5 seconds, Off for 5 seconds, On for 5 seconds, et

    Definite ssd I'm sure. Have changed about two dozen myself.

    You have to create support ticket and they will approve your ability to order it.

    After you install the SSD plug in the USB firmware stick before you power on. Be patient as it could take up to 15 min before firmware screen comes up. Load firmware then it should be OK.

    Normally the email tx settings have to be entered back in from my experience.

  9. #9
    Master Of The Obvious 10,000+ Posts
    KM bizhub C454e display On for 5 seconds, Off for 5 seconds, On for 5 seconds, etc.

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: KM bizhub C454e display On for 5 seconds, Off for 5 seconds, On for 5 seconds, et

    Our officially trained guy was onsite today to start the official request. Thanks everyone. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here