We are doing a customer site demo of two Konica Minolta mfps with Papercut embedded. Customer already has Papercut and have some sharp with a RF Ideas PcProx Plus reader.
Our readers are the HID AU-201 reader. The customers cards will work but it sees it as a new card because the reader outputs a different value than the customers current readers.
What all do I need to reconfigure our readers to be on the same format.
The customer supplied us with some configuration files named
ProxCard-Dual-Format.hwg+
pcProxConfig.dat
also the customer mentioned the program they use to configure their card readers
- Download and install RF Ideas pcProx® Plus program from online.
- Use the config files in this folder to configure the prox card reader
any information would be great.
Bookmarks