Hi
How to reset Konica Minolta C652 Drum, Transfer Belt and Fuser Unit?
Thanks and Regards,
Mearmi
Hi
How to reset Konica Minolta C652 Drum, Transfer Belt and Fuser Unit?
Thanks and Regards,
Mearmi
(2) New Release
• After replacing a fusing unit or transfer belt unit, perform New Release to clear its life
counter.
1.
Select the key as follows.
[Counter]
→ [Life] → [New Release].
2.
Select a unit where New Release is made.
3.
Press the Start key and perform New Release
From Service manual I hope this helps
T160mA fuse can be bought at Katun, and its easy to find them on ITB and Fuser.
Sent from my iDon't believe in marketing device using Tapatalk
Firmwares HERE.OK Google! ... will I need Berrocca this morning?
The C652 doesn't use a fuse system, the reset procudure was correctly posted above.
It the c451 series that uses a fuse.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Nr tripping on vendor models! Ta
Sent from my iDon't believe in marketing device using Tapatalk
Firmwares HERE.OK Google! ... will I need Berrocca this morning?
Bookmarks