Konioca Minolta C552: How to de-activate the conveyor output on FS 526 Finisher.

[copierdan500]

Hi, We have some C552's that came in and one of them doesn't have all the parts for the (very neat) conveyor that you can have on the FS-526 stapler finisher with the SD-608 saddle stitch option. So after one booklet it shows a jam.
Does anyone know if there is a setting to tell the machine that the conveyor output is not installed?
Thank you.
Dan

PS: why do all KM finisher and copiers have broken doors?!

[Synaux]

Hi, We have some C552's that came in and one of them doesn't have all the parts for the (very neat) conveyor that you can have on the FS-526 stapler finisher with the SD-608 saddle stitch option. So after one booklet it shows a jam.
Does anyone know if there is a setting to tell the machine that the conveyor output is not installed?
Thank you.
Dan

PS: why do all KM finisher and copiers have broken doors?!

Check service mode

The doors are often broken due to the FacT that the general population do not respect equipment in general. (and a somewhat weak hinge system is noted as well as logistical issues).

[emujo]

If the SD is installed and your conveyor isn't working, you might be able to disable the SD functionality in service mode/isolation, but you can't turn off the conveyor, it's part of the unit. Emujo