Thanks: 0
Likes: 0
Dislikes: 0
Right! Having skewed prints only from tray 1 on this device, have changed feed tyres over to eliminate that but still twisted on either portrait or landscape and copy or print. is there a lead edge setting in service mode that may help with this or any other suggestions??
Thanks in advance
I would be looking for the edge of the paper hitting something coming out of the tray. Is there any type of mark or dent on the lead edge?
I have had a reg roller heavily coated with paper dust cause skew and wrinkles on a c550
The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking
Originally Posted by fixthecopier
Yep, checked the path and all clear and no marks on lead edge
take off registration rollers and verifie the bushings
i had same problem
Paper skew and flipped corner at leading edge rear, flipped back, intermittently. Unlatched transfer assembly at rear. Re-latch the transfer assembly.
=^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Posting Permissions
Reply With Quote
Bookmarks