Konika/Minolta 7155/65 and Di 650

[Jr Garza]

thanks for the options something to defenitely look at very seriously !!!!

[mitchl]

Pssssst............... If you follow this link and do what D7Guitar says your machine will not belch toner and will run 1000000% better, this is the ultimate fix for these pigs! CMB's paper clip mod works, this is just a much longer term fix using the same principals. Have fun.
Konica 7165/7155 Developer Dumping Solution

[Dougall]

If you are talking about buying a new box for your problem machine, I would not count on the factory to have made the adjustment for you. I would get the jig to check the gap on the mag roller. Another thing to watch for is the smallest gear on the back of the dv box to strip, and that will cause the box to not pull toner to the mag roller. Check these gears each time you pull the box out. When they strip the cust. will complain of light copies. When you pull the dv unit you will see the toner backing out of where it is suposed to go in, cause the machine keeps calling for toner. If you rebuild the box then change the bushings also. Sloppy bushings will cause the gear to strip. Good Luck!

Is their a part number for the jig to check the gap on the mag roller?

[fixthecopier]

I think this is it. 56AAPJG100FOC, The foc stands for free of charge and that is the only one in my inventory that was free from Konica Minolta. Good Luck!