KM says Controller is not connected, eventhough IC-413 led displays 00

[mshabban]

http://www.copytechnet.com/forums/attachments/konica-minolta/27512d1419710489-km-says-controller-not-connected-eventhough-ic-413-led-displays-00-a-pri_dlbt1100846en-pdf


that one?

Thanks mate for the quick reply ,though hope you wouldn't mind me asking you for the download link for 1-18LDJR ,please as i have searched all in vain;
will truly appreciate .

[mshabban]

can anyone help me with a download link for this patch 1-18LDJR its for konica minolta c6000 fiery IC-413

[arahael]

donate for this forum and i will see

[mshabban]

donate for this forum and i will see

Hey mate thanks for the reply , though i wonder where do i go to donate to thiis forum ,coz i search can't find it ,help me with the procedure if you can please.

[mshabban]

donate for this forum and i will see

Hello mate , i have just donated some on this forum as you instructed me ,am kindly begging you please to help with the download link for the fiery patch 1-18LDJRIC-413 / Fiery E100 70-60C-KM controller.

[rolls.bo]

WARNING ! If you do not perform the EFI 1-18LDJR Patch on the IC-413, the CONTROLLER button will not be displayed on the 6000 or 6000L LCD Display, so you will not be able to assign the correct IP ADD to the Controller itself. If you do not know the IP ADD of the IC-413 you will not be able to apply the Patch to it

[tommylos]

Hey mate thanks for the reply , though i wonder where do i go to donate to thiis forum ,coz i search can't find it ,help me with the procedure if you can please.

Hello, did you manage to sort out the issue?