hi,
when i'm trying to update the firmware of c220 the machine says invalid memory. Is anybody have solution
hi,
when i'm trying to update the firmware of c220 the machine says invalid memory. Is anybody have solution
On start-up? Change the flash drive?
Format your USB stick, Fat 32 in Windows & only copy the .TAR file to the root
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Try another USB as said above
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Try & update the firmware over pagescope
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
The thumb drive should be between 2 and 8gb (although I have used larger ones). The file has to be on the root of the drive, not in a separate folder. I find it works best if there isn't anything else on the thumb drive besides the firmware.
Hope this helps.
Are you using the service port?
Mabe the problem is not with the USB but internal?
Bookmarks