Can't find out how to reset the fuser or laser counter on a bizhub 20P. Anyone got ideas? Is it like replacing IU (hold Go button 4 secs)?
Can't find out how to reset the fuser or laser counter on a bizhub 20P. Anyone got ideas? Is it like replacing IU (hold Go button 4 secs)?
I also have this question, anyone?
The reset isn't covered in the service manual? hmmmm Seems it should be!?
Here is the answer, there is a utility at KonicaMinolta.com under utilities in One-Stop product support. The utility works in conjunction with small files also available in the same area of the website. Part of the problem may be that this is a re-branded Brother machine.
Download BrUsbSN_KonicaMinolta.zip and Replace.zip, and follow these instructions.
Bizhub_20P_reset_info.pdf
Last edited by giddyupngo; 09-05-2017 at 04:32 PM. Reason: fixing attachment
It is an HL-5380 cross reference. The reset is done with the maintenance utility on your computer. good luck
copyguy69
Look under the service manual for the HL-5370 and you will see the 5380 listed. I don't know why it is not listed, but it is there. Good luck
copyguy69
Bookmarks