BizHub 223 ADF DF617-618

[copyman]

I have 3 machines skewing the originals. Anyone
else see this before?

I saw the bulletin addressing this issue on the
K/M knowledge base. They were giving out the
modification parts for free at one point. Now you
have to buy the parts for around $80. I usually
wouldn't gripe about that but the parts consist of
2 pins that hold the ADF left door on and 2 small
brackets.

I guess my question is if anyone found a
workaround?

I hate giving K/M $80 for 10 cents worth of metal!

Thanks in advance

[allan]

Here in ZA the B223 only comes with DF-621 and they all work fine. Can you get DF-621. The nice thing about africa we get the stuff so late all the problems have been tweeked out already.

[copyman]

It has the DF617 installed

[allan]

That is one of my all time favorite machines. No DF trouble at all. Just check our Knowledge base and did not find any bulletins for DF-617. There is a bulletins out on the DF-621 for the pickup rollers not lifting right.

[copyman]

See attached