Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Technician
    Join Date
    Jul 2014
    Posts
    18
    Rep Power
    20

    PRO 1051 density stability

    Hello . I have a problem on the copier pro1051 . When you print a book of 30 pages , is a problem that image once dark , sometimes pale . Not straight-line printing throughout the procedure . Has anyone had a similar problem?

  2. #2
    Technician
    Join Date
    Jan 2010
    Location
    dallastown PA
    Posts
    11
    Rep Power
    29

    Re: PRO 1051 density stability

    Quote Originally Posted by fajdoooo View Post
    Hello . I have a problem on the copier pro1051 . When you print a book of 30 pages , is a problem that image once dark , sometimes pale . Not straight-line printing throughout the procedure . Has anyone had a similar problem?
    I have seen this I would change dev run all set ups for dev change. then go into test chart pint outs and run 200 of test chart 12.

  3. #3
    Technician
    Join Date
    Jul 2014
    Posts
    18
    Rep Power
    20

    Re: PRO 1051 density stability

    Quote Originally Posted by copy View Post
    I have seen this I would change dev run all set ups for dev change. then go into test chart pint outs and run 200 of test chart 12.
    yes, but how too, I tried os SW27-5/6, but....

  4. #4
    Technician
    Join Date
    Jan 2010
    Location
    dallastown PA
    Posts
    11
    Rep Power
    29

    Re: PRO 1051 density stability

    Quote Originally Posted by fajdoooo View Post
    yes, but how too, I tried os SW27-5/6, but....
    How to what test chart 12 is under outputs under test output in service mode

  5. #5
    Technician
    Join Date
    Jul 2014
    Posts
    18
    Rep Power
    20

    Re: PRO 1051 density stability

    Quote Originally Posted by copy View Post
    How to what test chart 12 is under outputs under test output in service mode
    I tried 200 test charts, but it was not the same. I also tried to switch SW27 to 1 but it vas not ok.

  6. #6
    Field Supervisor 500+ Posts Luther's Avatar
    Join Date
    May 2006
    Location
    crystal lake ,Illinois
    Posts
    682
    Rep Power
    44

    Re: PRO 1051 density stability

    clean the sensors near the drum and install a new charge corona

  7. #7
    Technician
    Join Date
    Jul 2014
    Posts
    18
    Rep Power
    20

    Re: PRO 1051 density stability

    Quote Originally Posted by Luther View Post
    clean the sensors near the drum and install a new charge corona
    I firs clean the sensor on the drum vith alcohol, and replace the corona, drum and developer, make all the setting vhen replace the drum, but it was the same s..t

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here