Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Senior Tech 250+ Posts
    Join Date
    Mar 2010
    Location
    Lancaster Ohio
    Posts
    258
    Rep Power
    31

    konica c363 color streaks on b/w copy

    have a customer with a konica c363 that black and white is set as priority. 4 times in 2 months they went to print out a black and white copy and it had red streaks down one side(looked like failed blade) and alternating yellow green and blue down the other side. it took 7 copies for it to clear up. this only happens once every couple weeks. any ideas thanks

  2. #2
    Master Of The Obvious 10,000+ Posts
    konica c363  color streaks on b/w copy

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,471
    Rep Power
    463

    Re: konica c363 color streaks on b/w copy

    For starters I think you need to check the model number. Valid models include:

    bizhub C360
    bizhub C364
    bizhub C364e
    bizhub 364e
    bizhub 363

    but never bizhub C363. Since you so specifically describe color images when selecting monochrome, I think I can safely assume that it is a color copier. Most likely the primary transfer belt is not cleaning off the color registration patches completely. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Senior Tech 100+ Posts
    Join Date
    Jul 2010
    Location
    torino
    Posts
    150
    Rep Power
    29

    Re: konica c363 color streaks on b/w copy

    Quote Originally Posted by DOE View Post
    have a customer with a konica c363 that black and white is set as priority. 4 times in 2 months they went to print out a black and white copy and it had red streaks down one side(looked like failed blade) and alternating yellow green and blue down the other side. it took 7 copies for it to clear up. this only happens once every couple weeks. any ideas thanks
    probably blade tranfert belt
    if are c360
    form lumps toner in the downhill in recovery
    check if it is blocked

  4. #4
    Senior Tech 250+ Posts
    Join Date
    Mar 2010
    Location
    Lancaster Ohio
    Posts
    258
    Rep Power
    31

    Re: konica c363 color streaks on b/w copy

    Quote Originally Posted by blackcat4866 View Post
    For starters I think you need to check the model number. Valid models include:

    bizhub C360
    bizhub C364
    bizhub C364e
    bizhub 364e
    bizhub 363

    but never bizhub C363. Since you so specifically describe color images when selecting monochrome, I think I can safely assume that it is a color copier. Most likely the primary transfer belt is not cleaning off the color registration patches completely. =^..^=
    konica c360

  5. #5
    Senior Tech 250+ Posts
    Join Date
    Mar 2010
    Location
    Lancaster Ohio
    Posts
    258
    Rep Power
    31

    Re: konica c363 color streaks on b/w copy

    Quote Originally Posted by DOE View Post
    have a customer with a konica c360 that black and white is set as priority. 4 times in 2 months they went to print out a black and white copy and it had red streaks down one side(looked like failed blade) and alternating yellow green and blue down the other side. it took 7 copies for it to clear up. this only happens once every couple weeks. any ideas thanks
    konica c360

  6. #6
    Master Of The Obvious 10,000+ Posts
    konica c363  color streaks on b/w copy

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,471
    Rep Power
    463

    Re: konica c363 color streaks on b/w copy

    If you're getting multiple colors it's most likely the transfer belt cleaning blade that has failed. Perhaps there is a piece of paper shoved in there. Sometimes you can clean the blade and re-prime it. But 9 times out of 10 you'll have to order the primary transfer belt assembly.

    Are you getting the mustaches? That usually means their is one or more pierce hole(s) in the primary transfer belt. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here