Problem with image modul of biz 163/211 di200

[copycommerce]

I was having serios troubles with one of thise moduls,it started to make sounds(trak trak trak).After i opened it i saw that one of the gears was in bad condition i replaced it and for nearly a month the machines was working fine,now the same problem this time the gear was totaly crashed,the bushing on the shneck too.When i return the developer and manualy spin it its having pressure,does someone know what cause it?Sorry for my bad english, still improving it

[wagon]

It sounds like the waste toner auger is blocked and jammed. You need to disassemble, clean and inspect this area and replace parts (gears, etc.) as needed. This is a very common fault with all this series of machine.

[copycommerce]

The problem with the waste toner is solving very easy,you just need to pill out one metal plate
Here is only for the second part of the imaging unit,one collegue of mine told me before a hour that he placed a little fuser oil at the bushings and the noise dissapeared,im gonna try it today.