Bizhub 600 Always warming Up

**arsalan ali** · 11-07-2013

Originally Posted by Wasfil

PC Drum, Starter tobe replace before, but the problem has be come after amoment (1minute) I do copy once in the screen "Warming Up Ready to Scan" I can do Scan, but the result print not going out.I have do : Drum Peculiarity - Auto MAx. Density Adj the result is Ok, then Auto gamma Adjst. (1dot) and (2dot) the result is Error 1, in the book that mean TCSB dirt,In other machine i have change/replace with New TCSB the problem is lose. (Ihave 2 machine with same problem)Thanks alot for All guys.....

the same thing happened with me in bizhub 600 after intalling new drum . machines goes on warming up for long time time

**chand226** · 02-01-2014

Originally Posted by arsalan ali

the same thing happened with me in bizhub 600 after intalling new drum . machines goes on warming up for long time time

i read all the threads
i have 200% correct formula for this copier (biz600/750/ di7210/7272)
contact me at chand226@gmail.com

**chand226** · 02-01-2014

Originally Posted by Accentcp

Can also happen if the counters are not cleared on PM.Messes up aging..

no need of to change any firmware and drum.

i have 200% correct formula for this copier (biz600/750/ di7210/7272). no toner on corona, no warming up, pleasewait.
contact me at chand226@gmail.com

**CompyTech** · 02-01-2014

Then why don't you post it here? It's not like its some big trade secret any more. Those boxes are old as the hills, most people just want to fix the damned things and move on to the next call.

Sent from my Nexus 7 using Tapatalk

**chand226** · 02-02-2014

Originally Posted by CompyTech

Then why don't you post it here? It's not like its some big trade secret any more. Those boxes are old as the hills, most people just want to fix the damned things and move on to the next call.

Sent from my Nexus 7 using Tapatalk

contact me.. i can solve this problem on best way

**Synaux** · 02-03-2014

Originally Posted by chand226

contact me.. i can solve this problem on best way

If you are unable to post anything meaningful here, it is doubtful that you can assist anyone who may contact you. GTFO, Thanks!

**solidzdawg** · 02-03-2014

1.) Clean the sensors extremely well in the drum carriage.

2.) Ensure that the developer is not extremely worn.

3.)take front fusing unit plastic cover off, cheat front doors, and ensure lamps are running