Bizhub c350 imaging unit -Message override

[dmzfmz]

Got a Bizhub c350 --After displaying REPLACE
IMAGING UNIT SOON --the machine just stopped
--says CHANGE IMAGING UNIT-
Any techs know how to disable that message
and allow machine to continue using that
imaging unit without a chip reset (black)
Thanks in Advance

[ni311]

You cannot override the message.
You have two choices:
- buy a new unit
- buy a chip resetter
A new unit can be used once, but with a chip resetter you can reset an unlimited number of units.

[cobiray]

You cannot reset the message but you can disable the lockout on the IU's. I would have the units replaced and ask your tech to disable the lockout for you on the service call.

[redhotrob]

Yes, the factory default is for the machines to stop when the image unit life has expired. In the service security mode this can be disabled.
Stop,9

[popcornpuppy]

once in tech rep mode press stop, 9 and set image units from "stop" to "no stop" on newer machines you need to press stop, 0, C once in tech mode

[DarthAlbin]

	Quote:			Originally Posted by cobiray
	You cannot reset the message but you can disable the lockout on the IU's. I would have the units replaced and ask your tech to disable the lockout for you on the service call.

I thought that feature didn't come out until the C450.

Never mind. I forgot. Newer FW feature right?

[deep]

	Quote:			Originally Posted by DarthAlbin
	I thought that feature didn't come out until the C450. Never mind. I forgot. Newer FW feature right?

Absolutely correct. Some features will be different depends on what category you machine is.

Sometimes if a lot of customers feel unhappy on some unreasonable feature, the manufacturer will modified it.

[Shayra]

If you work for a dealer...Try contacting a wholesale distributor like Copylite for the chip. Each chip is priced below $20.